CTS 500K Push Pull DPDT - 450G Series Long Shaft Audio Taper - Pro pots for Guitar & Bass
Premium Components - Manufactured by CTS Corporation
Each pot comes with a flat washer, lock washer and two hex mounting nuts for custom height adjustment.
Resistance Values: 500K Ohms - Taper: Audio
Resistance Tolerance: +/-10%
Pot Diameter: (.94") - Body Depth: (.96").
Shaft Rotation: 300°
Shaft Diameter: 1/4" (.25") (6.35mm) - Shaft Type: Split Knurled
Shaft Material: Brass - Threaded Shaft Diameter: 3/8" (.375") (9.52mm)
Thread height, Long shaft 3/4" (19.4mm) - Threaded Shaft Material: Brass
Spline count (Type): 24 (Fine) - Spline Height: 3/8" (.375")
U.S. Thread Pitch: 3/8-32NEF
500K pots are the standard for humbuckers, 250K are generally used for single coil pickups. A 250K gives a slightly warmer sound than a 500K, and attenuates some of the high frequencies to ground. However, if you want to keep the high frequencies, it is possible to correct this attenuation with treble bleed.
Note: If you are not sure if your guitar uses a short (3/8") or long (3/4") shaft, please check before ordering. As a general rule, this pot will fit most guitars made in the U.S. and Mexico, but it is always safer to check the bushing diameter and pot height.
If your guitar is an import... and you want to update the pots, you may have to enlarge the diameter of the holes on the body very slightly.
When installing the knobs, be sure to pinch the end of the shaft before installing them, this will prevent you from jamming them or knocking the shaft off the pots. If this hasn't happened to you before...
Any questions... please feel free to contact us.
Thanks for visiting BadAss Tone
CTS 500K - DPDT Audio Taper - Long Split Shaft (Brass Shaft and Bushing) Qty. 1
- CTS 450G Series is specifically designed for top performance in guitar volume and tone circuits. CTS pots have long been the first choice for American guitars.
CTS Audio taper with BRASS SHAFT & BRASS BUSHING are the highest-grade pots available from CTS.
CTS Push Pull Pots, DPDT allows you to add a switch to your guitar without adding a hole. On these high quality CTS Push Pull pots, the switch contacts are on the side, not the back. This means they are shorter, allowing them to fit most guitars without drilling holes - 1 inch deep cavity is all that is needed.
The two-pole, two-position switch offers many wiring options. Pull the switch to mute a humbucker, turn a pickup on/off, or control anything: the switch is electrically separate from the control pot.
CTS has worked hard to develop these unique control pots. In addition to their space saving size, they feature a longer life brass shaft and a resistance tolerance of ±10%.
Their precision audio cone provides a smoother, more accurate response than economy pots. Volume increases smoothly from 0 to 10, with no abrupt changes.
Available with a slotted shaft for a fine knob (24 splines), or with a smooth shaft to fit a screw-in knob. The long shaft fits Les Paul® and other solid body carved-tops.
Each CTS stem includes a flat washer, lock washer and two hex mounting nuts for custom height adjustment on a pickguard or control plate.
Low noise, rugged construction, brass shaft, brass bushing, smooth feel, dew height adjustments, reduced shaft wobble, superior durability and long lasting. Note: If you are not satisfied with your purchase, you may return it. The return must be done within a maximum of 30 days following the reception of the article. In this case, you will be asked for the order number and the item to return.
In order for us to accept a returned item, it MUST be unused and in the same condition as it was shipped (this means that you have not been welded or cut, etc.).