CTS 250K - 450G Series Short Shaft Audio Taper - Pro pots for Guitar & Bass
Premium Components - Manufactured by CTS Corporation
CTS fine spline 1/4 shafts are used in most American guitars.
Includes friction washer, top washer and mounting nut.
Resistance Values: 250K Ohms - Taper: Audio
Resistance Tolerance: +/-10%
Pot Diameter: 15/16" (.9375") - Body Depth: 0.45 in.
Shaft Rotation: 300°
Shaft Diameter: 1/4" (.25") (6.35mm) - Shaft Type: Split Knurled
Shaft Material: Brass - Threaded Shaft Diameter: 3/8" (.375")
Thread height, Short shaft 3/8" (9.52mm) - Threaded Shaft Material: Brass
Spline count (Type): 24 (Fine) - Spline Height: 3/8" (.375")
U.S. Thread Pitch: 3/8-32NEF
Note: If you are not sure if your guitar uses a short (3/8") or long (3/4") shaft, please check before ordering. As a general rule, this pot will fit most guitars made in the U.S. and Mexico, but it is always safer to check the bushing diameter and pot height.
If your guitar is an import... and you want to update the pots, you may have to enlarge the diameter of the holes on the body very slightly.
When installing the knobs, be sure to pinch the end of the shaft before installing them, this will prevent you from jamming them or knocking the shaft off the pots. If this hasn't happened to you before...
Any questions... please feel free to contact us.
Thanks for visiting BadAss Tone
CTS 250K - Audio Taper - Split Shaft (Brass Shaft and Bushing) Qty. 1
- CTS 450G Series is specifically designed for top performance in guitar volume and tone circuits.
CTS Audio taper with BRASS SHAFT & BRASS BUSHING are the highest-grade pots available from CTS.
Low Noise, Robust Construction, Proprietary Anti-Static Lube, Brass Shaft, Brass Bushing, Smooth Feel, Various Shaft Trims, Wide Selection of Tapers, Reduced Shaft Wobble, Solderable Cover, Superior and Long-Life Durability. Note: If you are not satisfied with your purchase, you may return it. The return must be done within a maximum of 30 days following the reception of the article. In this case, you will be asked for the order number and the item to return.
In order for us to accept a returned item, it MUST be unused and in the same condition as it was shipped (this means that you have not been welded or cut, etc.).