Bourns 250K Push Pull Short Split Shaft audio taper - Guitar & Bass Pots
Premium Components - Manufactured by Bourns Pro Audio
Bourns Pro Audio Push-Pull pot. Super tough construction and smooth feel in a compact size. Use for coils splitting, reverse phase switching and other functions. High quality push-pull pot.
Resistance Values: 250K Ohms - Taper: Audio
Resistance Tolerance: +/-15%
Pot Diameter: 15/16" (.9375") - Required Cavity Depth: (1.05")
Shaft Rotation: 300°
Shaft Diameter: (.25") (6.35mm) -Shaft Type: Split Knurled
Shaft Material: Aluminum - Threaded Shaft Material: Brass
Threaded Shaft Diameter: 3/8" (.375") - Threaded Shaft Length: 3/8" (.375")
Spline Count (Type): 18 (Coarse) - Spline Height: 3/8" (.375")
Thread Pitch: 3/8-32NEF
250K are generally used for single coil pickups, 500K pots are the standard for humbuckers. A 250K gives a slightly warmer sound than a 500K, and attenuates some of the high frequencies to ground. However, if you want to keep the high frequencies, it is possible to correct this attenuation with treble bleed.
Note: If you are not sure if your guitar uses a short (3/8") or long (3/4") shaft, please check before ordering. As a general rule, this pot will fit most guitars made in the U.S. and Mexico, but it is always safer to check the bushing diameter and pot height. Fit most Gibson Les Paul's manufactured before 1977 and historic reissues.
If your guitar is an import... and you want to update the pots, you may have to enlarge the diameter of the holes on the body very slightly.
When installing the knobs, be sure to pinch the end of the shaft before installing them, this will prevent you from jamming them or knocking the shaft off the pots. If this hasn't happened to you before...
Any questions... please feel free to contact us.
Thanks for visiting BadAss Tone
Bourns 250K - Push Pull Audio Taper Short Split Shaft - Qty: 2
PDB183-GTR - Guitar Potentiometer Push-Pull Switch
Bourns® Model PDB183-GTR Guitar Potentiometer with Push-Pull Switch allows the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.
The potentiometer is designed with a single shaft that is used to activate the Double-Pole, Double-Throw (DPDT) switch and to adjust the potentiometer. The DPDT switch can be wired for various switch functions.
Product Specs: Low noise, rugged construction, aluminum shaft, brass bushing, smooth feel, durability.Note: If you are not satisfied with your purchase, you may return it. The return must be done within a maximum of 30 days following the reception of the article. In this case, you will be asked for the order number and the item to return.
In order for us to accept a returned item, it MUST be unused and in the same condition as it was shipped (this means that you have not been welded or cut, etc.).